A feature set of ceilings there is high fire safety because the material from which the ceilings are made is non-combustible (thin sheet metal). The structure of the ceilings is designed for air conditioning with separation of air flows: into the interior and for blowing the side windows, which ensures a microclimate in the carriage. The ceilings have hinged hatches that provide access to the ventilation ducts and the lighting system.

Ceilings painted with powder paint are more resistant to the influence of detergents.

The lighting system built into the ceiling is an ergonomic design with light distribution throughout the cabin.

A set of windows is double-glazed windows with flats without aluminum edging along the contour. The windows are pasted into the car body. The apartments are made of aluminum profiles with thermal separation, with a handle and locks with a three-sided key. The delivery set includes materials for gluing the window into the car.

The peculiarity of the set of windows is that the windows are installed in the outer plane of the side walls of the car body without the use of a rubber profile, which increases the tightness of the windows. This design provides for the possibility of blowing windows to prevent them from fogging.

The interior equipment of the cabin is developed in an ergonomic design using modern wear-resistant materials.

Route signs are installed at the ends of the wagons, displaying information about the route, time, etc.

The cabin is equipped with televisions displaying information.

The seats are a metal frame and divided into separate seats. Each seat is covered with a wear-resistant flame-retardant fabric or vinyl leatherette. The seats are foldable (according to the design). A small stationary table for small things is installed under the window. Electric stoves are installed under the seat.

The salon is equipped with a stationary rack with folding luggage shelves and a place for attaching and transporting bicycles. It is possible to equip the salon as a place for transporting people with disabilities.

Luggage shelves made of aluminum profile are located along the interior above the windows. Hooks and illuminated seat numbering are installed on the luggage shelf. The shelves are also equipped with additional lighting.

The set of fences is a stainless steel casing with elements of attachment to the floor and to the side walls.

Increased corrosion resistance of casings, wear resistance, and resistance to detergents.

A set of facings of the side walls is a set of panels made of PVC plastic. The kit includes window shutters and hatches for access to the shutter mechanism. The delivery set of the panels includes a sealing rubber profile, which is installed between the panel and the window. The kit also includes fasteners and aluminum connecting profiles.

A feature of the design of the side walls is the performance of the function of decorative decoration of the interior. They have a system of air channels for blowing the side windows to prevent them from fogging up. The side walls are made of modern materials resistant to scratches and detergents.

The design of the side walls is adapted to quick installation, which reduces the customer's assembly time due to the absence of additional parts.

A set of partitions consists of partitions between the vestibule and the salon.

Partitions have a power frame made of a plywood sheet lined with fiberglass. The partition provides for the installation of sliding doors from the vestibule to the salon. Additionally, the kit includes partitions that conditionally divide the interior into three zones: a luggage compartment area with a rack and bicycle mounts and a passenger compartment divided into two zones. This planning is related to the design feature of the air conditioner and provides a more comfortable microclimate in the cabin. For the greater convenience of passengers, the information panels are placed on the partitions at a lower level, and not on the ceiling. The delivery set includes fasteners and aluminum profiles.

Salon doors consist of an electromechanical drive with a mechanism for sliding doors, mechanical latches in extreme positions, and aluminum sashes with glass and handles. The door leaves without a lower guide.

A feature of the sliding interior doors is their automatic closing and their sealing of the passenger interior from the vestibule area to ensure a microclimate in the interior. Various sensors are installed in the door to ensure the safety of passengers. The door is closed using a button.

The doors of the toilet and service room consist of a box made of stainless steel and a leaf made of plywood lined with plastic. Hinges and locks are installed in the sash (For the toilet door - inside the room, a T-shaped handle, outside - under a triangular key with an occupancy indicator).

A special feature of the doors of the toilet and service room is the built-in lock and hinge hardware, which reduces the time for installation and installation of the door. Door frames made of stainless steel are vandal-resistant.

Elements of vestibule facings with doors are made of fiberglass. The vestibule doors are equipped with locks for a three-sided key, which protects unauthorized access to electrical equipment elements. A thermal curtain is installed near the side door. 

A feature of vestibule cladding is that they are delivered in an assembled state - installed hatches, and accessories (locks, hinges, handles) for more convenient installation on the car. An air heater is built into the lining - a thermal curtain to minimize heat loss from the interior when the doors are opened in the cold season.

The floor toilet is made of fiberglass with molded linoleum with an anti-slip effect. A drain pipe is installed in the center.

A stainless steel handrail is located next to the window. Under the window, there are toilet paper holders of anti-vandal design. Protective covers made of stainless steel are installed on electric heaters.

The washbasin is made of fiberglass. The vertical upper rack is made of stainless steel. A vandal-proof faucet is installed on the vertical washstand. The supply of water from the washbasin faucet is provided by an electric button that supplies water in a dosed manner. On the rack, there is a door for servicing plumbing equipment. A vandal-proof stainless steel mirror is installed next to the sink. The drain from the wash basin is discharged into the fan pipe. Fan pipe - with electric heating.

Floor-standing toilet made of stainless steel with an outlet to the floor. Draining the water in the toilet is ensured by a pedal located on the toilet. The toilet is attached to the side wall.

The tank is made of stainless steel, the tank is heated (with the help of a heater), with additional external thermal insulation. A technological hatch on the side of the passenger compartment is provided for the maintenance of the heating system.

Door the driver's front and side cabins consist of a stainless box and an aluminum sash with built-in glass. Vestibule locks and external hinges are installed in the sash (material - stainless steel). The doors have a double sealing system.

The side door is sliding-sliding or sliding with an electromechanical drive, made of two aluminum leaves with glued glass and rubber seals. Protective glass railings are also installed in the sash.

A feature of sliding doors is their automatic closing and sealing of the vestibule area to ensure their microclimate. Various sensors are installed in the door to ensure the safety of passengers. The door is closed using a button.

The set of handrails consists of aluminum brackets and a steel pipe. The product is painted with powder paint. Handrails are installed next to the side doors in the middle of the vestibule and on the outside of the side doors of the driver's cab.

Driver's cab equipment set. The side walls of the driver's cabin are lined with PVC plastic, pasted over with sound-insulating material. Electric cabinet doors are equipped with three-sided key locks.

The frame of the driver's console is made of fiberglass, the control edges are unchanged, and they are installed on separate removable panels.

A stationary, adjustable driver's seat is installed in front of the console.

A fireproof partition made of plywood lined with plastic is installed between the service room and the cabin. A fireproof door is mounted in the partition, a box made of stainless steel, and a fireproof door made of plywood lined with plastic. Hinges and a lock made of stainless steel are installed in the sash. The assistant's folding chair is installed on the door leaf.

A protective roller is installed on the front windows. The ceiling is made of thin sheet metal covered with powder paint with soundproofing protection. LED lights are installed on the ceiling and in the hardware compartments.

A road sign and buffer signal lights are installed above the front windows.

In the driver's cab, in addition to the air conditioner, an air heater is additionally installed, which provides blowing of the front and side windows to prevent them from fogging, improving the microclimate around the driver.

A feature of the set is the execution of a more ergonomic driver's console made of fiberglass, resistant to scratches and detergents. In the cabin, there is a place for installing household appliances to improve the working conditions of the driver and driver's assistant.

A set of external cladding the wagon is a decorative shell of the outer part of the wagon, made of fiberglass 12 mm thick, with a protective layer that protects the surface from mechanical damage.

The exterior cladding kit is equipped with LED headlights, floodlights and buffer lights.

The mask made of fiberglass is not prone to corrosion and increases the sound and heat insulation of the cabin, ensuring the comfortable work of the driver.

Air conditioning system. AVK-26-4 is an autonomous car air conditioner designed to maintain comfortable air parameters in the car cabin. It is an air conditioning unit that includes elements for cooling, heating, air ventilation, and a control system installed in the general housing.
Air conditioning of the condenser is provided in the air conditioner.

Technical characteristics according to the drawing in the appendix.

AVK-10-4 - autonomous transport air conditioner, designed to maintain comfortable air parameters in the driver's cabin.

This air conditioning unit includes elements for cooling and heating in the general body. The air conditioner provides air cooling of the condenser.

Luggage shelf is a prefabricated structure made of aluminum profiles, sheet aluminum, and steel sidewalls painted with powder paint. The shelf is equipped with 'floating' clothes hooks and 110 V LED lighting.

Luggage rack is a welded metal structure made of stainless steel with a polished surface, consisting of side racks and three horizontal shelves of different widths for different luggage dimensions. The design provides a rigid attachment to the car body. Pipe racks⌀32 mm with a wall thickness of 3 mm. A pipe is used in the shelves⌀20 mm with a wall thickness of 2 mm.

Holder for bicycles is a bracket made of carbon steel with a powder coating. Attaches to the side wall of the car.