The side window with a window is a prefabricated structure, consisting of: a frame made of sheet stainless steel, 5 mm thick transport glass with applied silk-screen printing in the lower part of the window, and a sliding window. The frame is welded into the cabin body, the transport glass is glued flush with the outer surface of the driver's cabin. The housing is fixed in the extreme positions.

The ceiling with a lamp and ventilation grids is a set of products consisting of thermoformed plastic 4 mm thick, recessed lights with drivers, overhead ventilation grids made of stainless steel, a set of fasteners and a set of decorative aluminum profiles for installation in the joints of thermoformed plates.

The armrest is a prefabricated structure consisting of a plywood base, a PPU pillow, covered with vinyl leather. The armrest is attached to the side wall next to the sliding side window frame on two stainless steel brackets.

The wall cabinet is a welded structure made of sheet stainless steel with doors that can be locked with a three-sided key.

The frame of the driver's console is a set of products:

• remote control frame;
• panel covering;
• remote control door;
• table top

All elements are made of sheet aluminum with a powder coating.

The cladding kit is a set of fiberglass products:

• left and right frontal parts;
• left and right sides;
• a three-part end wall with a doorway in the middle part;
• a set of fasteners;
• a set of aluminum profiles.

The color of the panels is RAL7035, the thickness of the panels is 3 mm. A set of blinds for the front windows - overhead blinds with a width of 1200 mm, the curtains are lowered along the guides by 600 mm.